Turbo-Seal

Turbo-Seal is a trowel- or squeegee-applied, single component, <1% VOC, highly elastomeric, cold-applied polymer rubber gel with exceptional adhesive properties that contains more than 20% recycled material. Its superior flexibility, adhesiveness and self-healing characteristics make Turbo-Seal the ideal choice for effective, permanent waterproofing. Turbo-Seal can be applied to green concrete, reducing overall project time and costs.

Turbo Seal Composite Waterproofing System: combines a trowel- or squeegee-applied polymer rubber gel membrane with a durable HDPE protection sheet. This system protects the polymer rubber gel and provides an immediately trafficable surface for follow-on trades.

The protection sheets range from fleece-backed and non-fleece HDPE sheets (GFG20X & GFG16), drainage composites, bentonite carpets and protection boards. The flexibility of the polymer rubber gel combined with the durability of the various protection sheets creates a high-performance, substrate-responsive waterproofing system. The flexible polymer rubber gel component makes it ideal for construction where seismic events, foundation settlement, structural vibration/movement and thermal cycling conditions are a concern. As a cold-applied, single component system, application is safe and easy. Turbo-Seal benefits include:

  • Single component, cold-applied trowel or squeegee application with instantaneous adhesion ensures timely project completion with minimal substrate preparation.
  • Immediate placement of topping materials or backfill is possible.
  • Applies to green concrete; no surface primer necessary.
  • Low odor during application.
  • State of California VOC compliant.
  • Unique polymer rubber gel physical characteristics including self-healing, self-sealing, superior flexibility and adhesive properties.
  • No material loss in application.
  • Composite waterproofing system creates dual protection of sheet and polymer rubber gel membrane.
  • Composite polymer rubber gel assembly dynamically responds to substrate movement and provides double protection with HDPE protection sheet and polymer rubber gel membrane.
  • Excellent substrate conforming ability allows versatility of application for both new and restoration waterproofing applications.
  • Environmentally durable to soil contaminants and adverse soil conditions.
  • >20% post-consumer recycled content contributes to project LEED qualification.
  • Single component, cold-applied material is safe and easy to apply.

Thickness: 106 mil
1st Layer: Turbo Seal GT
2nd Layer: GFG20X
3rd Layer: e.drain 6000
System Overview TurboSeal Vertical Assembly
SPECIFICATION 2020 TurboSeal Guide Specification
PDS DuroTape
E.Series
PDS e.drain 6000
SDS DuroTape
E.Series
SDS e.drain 6200
SDS GFG16
SDS GFG20X
SDS TurboSeal GT
SDS TurboSeal U
System Information Sheet TurboSeal
System Overview TurboSeal Horizontal Assembly
22.200.1 VERTICAL HYDROSTATIC APPLICATION
22.200.1.1 VERTICAL HYDROSTATIC APPLICATION WITH INSULATION
22.210.6 WALL PROTECTION COURSE - SEAM OVERLAP
22.230.0 GRADE TERMINATIONS
22.250.1 WALL TO WALL EXPANSION JOINT - PLAN VIEW
22.251.1 WALL TO WALL CORNER EXPANSION JOINT - PLAN VIEW
22.252.1 JOINT OR CRACK AT WALL LESS THAN OR EQUAL TO 18 INCH - PLAN VIEW
22.252.2 JOINT OR CRACK AT WALL LESS THAN OR EQUAL TO 14 INCH.BUT GREATER THAN 18 INCH - PLAN VIEW
22.252.3 JOINT OR CRACK AT WALL GREATER THAN 14 INCH - PLAN VIEW
22.253.1 INSIDE AND OUTSIDE WALL CORNERS (PLAN VIEW) - NEW CONSTRUCTION
22.253.2 INSIDE AND OUTSIDE WALL CORNERS (PLAN VIEW) - RESTORATION
22.400.1 DECK ASSEMBLY
22.400.2 INSULATED DECK STANDARD ASSEMBLY
22.400.3 PEDESTAL PAVER DECK STANDARD ASSEMBLY
22.400.4 PEDESTAL PAVER INSULATED DECK STANDARD ASSEMBLY
22.400.5 PAVER ON MORTAR BED DECK STANDARD ASSEMBLY
22.400.6 PAVER ON SAND BED DECK STANDARD ASSEMBLY
22.410.6 DECK PROTECTION COURSE - SEAM OVERLAP
22.420.1 DECK PIPE PENETRATION
22.420.2 DECK PIPE PENETRATION WITH INSULATION
22.421.1 DECK CORED PIPE PENETRATION
22.421.2 DECK CORED PIPE PENETRATION WITH INSULATION
22.422.1 DECK SLEEVED PIPE PENETRATION
22.422.2 DECK SLEEVED PIPE PENETRATION WITH INSULATION
22.423.1 DECK POST PENETRATION
22.423.2 DECK POST PENETRATION WITH INSULATION
22.440.1.1 DECK TO WALL TRANSITION
22.450.1 DECK TO DECK EXPANSION JOINT
22.451.1 DECK TO WALL EXPANSION JOINT
22.452.1 JOINT OR CRACK AT DECK LESS THAN OR EQUAL TO 18th INCH
22.452.2 JOINT OR CRACK AT DECK LESS THAN OR EQUAL TO 14th inch.BUT GREATER THAN 18th inch
22.452.3 JOINT OR CRACK AT DECK GREATER THAN 14 inch