Below Grade Over Excavated Wall System Solutions

Choose the EPRO Post-Applied Below Grade Wall Protection System Assembly That’s Right for the Job.

EPRO Below Grade Over Excavated Wall Protection Systems provide vertical protection against nuisance water, perched water, or groundwater. They’re also used to protect against the lateral migration of various contaminated vapors and methane gas.

These systems are designed for positive side application to freestanding vertical walls made from ICF forms, CMU block, cast-in-place concrete, or shotcrete.

Wall Protection System
Thickness: 180 mils
1st Layer: e.spray
2nd Layer: e.shield 110b
3rd Layer: e.drain 6000

Designed to provide the most redundant and highest level of below grade building protection of the E.Series systems, E.Protect+ Wall provides unparalleled protection with a fully bonded system to the substrate and utilizes all three types of waterproofing: spray-applied polymer modified asphalt, bentonite, and a polyolefin sheet.

It is designed for projects that require the highest level of performance. E.Protect+ Wall is compatible with all different types of over excavated wall construction, two-sided formed, one-sided shotcrete, precast concrete, insulated concrete forms (ICF), and concrete masonry units (CMU).

E.Series
3.242.1 Wall Assembly Transition to Deck Assembly w/Asphalt Topping
E.Series
County of Los Angeles Approval
E.Series
NSF Approval 2015
E.Series
SPECIFICATION 2018 E.Protect+ Below Grade
SPECIFICATION 2018 E.Protect+ Walls
E.Series
PDS e.adhesive
E.Series
PDS e.catalyst
E.Series
PDS e.drain 6000
E.Series
PDS e.hanger
E.Series
PDS e.poly
E.Series
PDS e.roll
PDS e.shield 110b
E.Series
PDS e.spray
Epro
PDS e.stop b
Epro
PDS e.stop hpl
E.Series
PDS e.term hd
E.Series
SDS Calcium Chloride
E.Series
SDS e.adhesive
E.Series
SDS e.catalyst
E.Series
SDS e.drain 6000
E.Series
SDS e.drain 6200
E.Series
SDS e.poly
E.Series
SDS e.roll
SDS e.shield 110b
E.Series
SDS e.spray
E.Series
SDS e.stop b
Epro
SDS e.stop hpl
E.Series
SDS e.term af
E.Series
SDS e.term asl
E.Series
SDS e.term hd
E.Series
SDS e.term strip
E.Series
SDS e.trowel
E.Series
SDS Polymers
E.Series
EPRO Brochure
System Overview E.Protect+ Wall
3.200.1 Wall Assembly
3.201.1 Wall Bottom Positive Side
3.201.2 Wall Bottom w/Site Drain Positive Side
3.210.4 Wall E.Shield 110B Overlap
3.211.1 Concrete Wall Seismic Expansion Joint
3.212.1 Concrete Wall Control Joint
3.220.1 Wall Pipe Penetration
3.230.1 Wall Termination @ Grade
E.Series
3.240.1 Wall Assembly Transition to Deck Assembly
3.240.2 Wall Transition to E.Protect+ Deck Concrete Topping
3.240.3 Wall Transition to E.Protect+ Deck Asphalt Topping
3.240.3.13 E.Protect+ Wall Assembly Transition to Hot Fluid Applied
3.240.4 Wall Transition to E.Protect+ Deck Pavers
E.Series
3.241.1 Wall Assembly Transition to Deck Assembly w/Concrete Topping
3.241.2 Wall Transition to E.Protect Deck Concrete Topping
3.241.3 Wall Transition to E.Protect Deck Asphalt Topping
3.241.4 Wall Transition to E.Protect Deck Pavers
E.Series
3.243.1 Wall Assembly Transition to Deck Assembly w/Pedestal Pavers
3.247.1 Wall Assembly Termination Transition to Self Adhered Membrane
3.248.1 Wall Transition to Shoring (Plan View)
3.260.1 Wall Inside-Outside Corner Detail
3.261.1 Wall to Footing Cold Joint
E.Series
3.342.1 Shoring Assembly Transition to Deck Assembly w/Asphalt Topping
Wall Protection System
Thickness: 95 mils
1st Layer: e.spray
2nd Layer: e.shield 115
3rd Layer: e.drain 6000

Ideal for below-grade building foundations requiring underslab waterproofing protection, but where site conditions or budget considerations might not require an additional layer of bentonite protection. E.Protect Wall can be used in conjunction with other E.Series systems and is designed to handle a wide variety of positive side wall conditions, while providing enhanced protection against common backfill materials.

It is compatible with all different types of over excavated wall construction, two-sided formed, one-sided shotcrete, precast concrete, insulated concrete forms (ICF), and concrete masonry units (CMU).

E.Series
2.241.1 Wall Assembly Transition to Deck Assembly w/Concrete Topping
E.Series
County of Los Angeles Approval
E.Series
NSF Approval 2015
E.Series
SPECIFICATION 2018 E.Protect Below Grade
SPECIFICATION 2018 E.Protect Walls
E.Series
PDS e.adhesive
E.Series
PDS e.catalyst
E.Series
PDS e.drain 6000
E.Series
PDS e.hanger
E.Series
PDS e.poly
E.Series
PDS e.roll
E.Series
PDS e.shield 115
E.Series
PDS e.spray
Epro
PDS e.stop b
Epro
PDS e.stop hpl
E.Series
PDS e.term hd
E.Series
SDS Calcium Chloride
E.Series
SDS e.adhesive
E.Series
SDS e.catalyst
E.Series
SDS e.drain 6000
E.Series
SDS e.drain 6200
E.Series
SDS e.poly
E.Series
SDS e.roll
E.Series
SDS e.shield 110
E.Series
SDS e.shield 115
E.Series
SDS e.spray
E.Series
SDS e.stop b
Epro
SDS e.stop hpl
E.Series
SDS e.tape 106
E.Series
SDS e.term hd
E.Series
SDS e.term strip
E.Series
SDS e.trowel
E.Series
EPRO Brochure
System Overview E.Protect Wall
E.Series
2.143.1 Underslab Assembly Transition to Overexcavated Wall
2.200.1 Wall Assembly
2.201.1 Wall Bottom Positive Side
2.201.2 Wall Bottom w/Site Drain Positive Side
2.210.3 Wall E.Shield 115 Overlap
2.211.1 Concrete Wall Seismic Expansion Joint
2.212.1 Concrete Wall Control Joint
2.220.1 Wall Pipe Penetration
2.230.1 Wall Termination @ Grade
E.Series
2.240.1 Wall Assembly Transition to Deck Assembly
2.240.2 Wall Transition to E.Protect+ Deck Concrete Topping
2.240.3 Wall Transition to E.Protect+ Deck Asphalt Topping
2.240.3.14 E.Protect Wall Assembly Transition to Hot Fluid Applied
2.240.4 Wall Transition to E.Protect+ Deck Pavers
2.241.2 Wall Transition to E.Protect Deck Concrete Topping
2.241.3 Wall Transition to E.Protect Deck Asphalt Topping
2.241.4 Wall Transition to E.Protect Deck Pavers
E.Series
2.242.1 Wall Assembly Transition to Deck Assembly w/Asphalt Topping
E.Series
2.243.1 Wall Assembly Transition to Deck Assembly w/Pedestal Pavers
2.247.1 Wall Assembly Termination Transition to Self Adhered Membrane
2.248.1 Wall Transition to Shoring (Plan View)
2.260.1 Wall Inside-Outside Corner Detail
2.261.1 Wall to Footing Cold Joint Detail
E.Series
2.342.1 Shoring Assembly Transition to Deck Assembly w/Asphalt Topping
Wall Protection System
Thickness: 70 mils
1st Layer: e.spray
2nd Layer: e.shield 110
3rd Layer: e.drain

Designed to be used with or without an underslab barrier for sites with minimal waterproofing risk, or in conjunction with other E.Series systems when above the design water table.

Just like any E.Series system, It is is compatible with all different types of over excavated wall construction, two-sided formed, one-sided shotcrete, precast concrete, insulated concrete forms (ICF), and concrete masonry units (CMU).

E.Series
County of Los Angeles Approval
E.Series
NSF Approval 2015
E.Series
SPECIFICATION 2018 E.Proformance Below Grade
SPECIFICATION 2018 E.Proformance Walls
E.Series
PDS e.adhesive
E.Series
PDS e.catalyst
E.Series
PDS e.drain 6000
E.Series
PDS e.poly
E.Series
PDS e.roll
E.Series
PDS e.shield 110
E.Series
PDS e.spray
Epro
PDS e.stop b
Epro
PDS e.stop hpl
E.Series
PDS e.term hd
E.Series
SDS Calcium Chloride
E.Series
SDS e.adhesive
E.Series
SDS e.catalyst
E.Series
SDS e.drain
E.Series
SDS e.drain 6000
E.Series
SDS e.drain 6200
E.Series
SDS e.poly
E.Series
SDS e.roll
E.Series
SDS e.shield 110
E.Series
SDS e.shield 115
E.Series
SDS e.spray
E.Series
SDS e.stop b
Epro
SDS e.stop hpl
E.Series
SDS e.tape 106
E.Series
SDS e.term af
E.Series
SDS e.term asl
E.Series
SDS e.term hd
E.Series
SDS e.term strip
E.Series
SDS e.trowel
E.Series
SDS Polymers
E.Series
EPRO Brochure
System Overview E.Proformance Wall
1.200.1 Wall Assembly
1.200.2 ICF Wall Assembly
1.201.1 Wall Bottom Positive Side
1.201.2 Wall Bottom w/Site Drain Positive Side
1.202.1 ICF Wall Bottom Positive Side
1.210.1 Wall E.Shield 110 Overlap
1.211.1 Concrete Wall Seismic Expansion Joint
1.212.1 Concrete Wall Control Joint
1.220.1 Wall Pipe Penetration
1.221.1 ICF Wall Pipe Penetration
1.230.1 Wall Termination @ Grade
1.230.2 ICF Wall Termination @ Grade
1.240.1 Wall to Transition to E.Protect+ Deck
1.240.2 Wall Transition to E.Protect+ Deck Concrete Topping
1.240.3 Wall Transition to E.Protect+ Deck Asphalt Topping
1.240.3.15 E.Proformance Wall Assembly Transition to Hot Fluid Applied
1.240.4 Wall Transition to E.Protect+ Deck Pavers
1.241.2 Wall Transition to E.Protect Deck Concrete Topping
1.241.3 Wall Transition to E.Protect Deck Asphalt Topping
1.241.4 Wall Transition to E.Protect Deck Pavers
1.247.1 Wall Assembly Termination Transition to Self Adhered Membrane
E.Series
1.248.1 Wall Assembly Transition To Shoring Assembly - Plan View
E.Series
1.248.2 Wall Assembly Transition to Shoring Assembly - Section View
1.260.1 Wall Inside-Outside Corner Detail
1.261.1 Wall to Footing Cold Joint Detail