PrimeTak

PrimeTak

PrimeTak is an HDPE-backed, self-adhesive rubberized asphalt peel-and-stick waterproofing membrane. Fast and easily applied, PrimeTak is ideal for both horizontal and vertical waterproofing applications.

PrimeTak membrane is a 60-mil strong, pliable, self-adhesive sheet membrane consisting of a 4-mil cross-laminated, high-density polyethylene (HDPE) backing bonded to 56-mils of rubberized asphalt waterproofing compound.

PrimeTak is used on concrete foundation walls, split slabs, sills and spandrel beams, tunnels, plaza decks, parking garages and related applications where waterproofing is critical. PrimeTak may also be used on wood, concrete masonry (CMU) structures and Insulated Concrete Forms (ICF).
PrimeTak conforms to the following specifications:

  • Corps of Engineers CEGS-0711 AIA
  • MasterSpec Section 07111
  • Federal Construction Guide FCGS 07111
  • General Service Administration PBS (PCD) 07111
  • Department of the Navy NAV FAC TS 07111
  • American Railway Engineering Association (AREA) 29-2
  • Veterans Administration 14-08-1 Section 07311


PrimeTak has several benefits:

  • Factory bonding assures 60-mil uniform thickness.
  • Wide membrane width allows for fast and easy application with reduced seams on continuous flat surfaces.
  • Detail Tape available for trim corners, construction joints and other applications.
  • Release film to prevent tears.
  • Extended selvage edge for seam asphalt-to-asphalt adhesion.
  • White color to help reflect heat.

 

Thickness: 60 mil.
Data Sheets, Specs & Drawings
PDS PM Sealant
PDS PrimeTak
PDS PrimeTak Primer
Epro
SDS e.stop gu
SDS PM Sealant
SDS PrimeTak
SDS PrimeTak Primer
50.143.1.55 Underslab Assembly - Vertical Transition - PrimeTak Post-Applied System
50.144.1.55 Underslab Assembly - Offset Matslab Transition - PrimeTak Post-Applied System
50.145.1.55 Underslab Assembly - Stepped Footing Transition - PrimeTak Post-Applied System
51.143.1.1.55 Underslab Assembly - Vertical Transition - PrimeTak Post-Applied System (Option 1)
51.143.1.2.55 Underslab Assembly - Vertical Transition - PrimeTak Post-Applied System (Option 2)
51.143.1.3.55 Underslab Assembly - Vertical Transition - PrimeTak Post-Applied System (Option 3)
51.143.1.4.55 PreTak Underslab Assembly Transition To PrimeTak Over excavated Wall Assembly
51.145.1.55 Underslab Assembly - Stepped Footing Transition - PrimeTak Post-Applied System
51.340.1.1.55 Wall to Deck Transition - Non-Hydrostatic - Wall PreTak to Suspended Slab Construction Joint
51.340.1.2.55 Wall to Deck Transition - Hydrostatic - Wall PreTak to Suspended Slab Construction Joint
51.340.2.1.55 Wall to Deck Transition - Non Hydrostatic - Wall PreTak to Top of Suspended Slab
51.340.2.2.55 Wall to Deck Transition - Hydrostatic - Wall PreTak to Top of Suspended Slab
55.200.1 WALL ASSEMBLY - NON-HYDROSTATIC
55.200.1.1 WALL ASSEMBLY - NON-HYDROSTATIC - INSULATED
55.201.1 WALL ASSEMBLY - NON-HYDROSTATIC - INTERIOR FLOOR SLAB 12" OR LESS ABOVE TOP OF FOOTING
55.201.2 WALL ASSEMBLY - NON-HYDROSTATIC - INTERIOR FLOOR SLAB 12" OR LESS ABOVE TOP OF FOOTING WITH SITE DRAINAGE
55.203.1 WALL ASSEMBLY - NON-HYDROSTATIC - INTERIOR FLOOR SLAB 12" OR MORE ABOVE TOP OF FOOTING
55.205.1 WALL ASSEMBLY - NON-HYDROSTATIC - OVER INLINE MATSLAB
55.205.2 WALL ASSEMBLY - NON-HYDROSTATIC - OVER INLINE MATSLAB WITH SITE DRAINAGE
55.207.1 WALL ASSEMBLY - NON-HYDROSTATIC - OVER OFFSET MATSLAB
55.210.1 SEAM OPTIONS - PLAN VIEW
55.210.2 SEAM OPTIONS - ISOMETRIC VIEW
55.211.1 WALL CRACK AND JOINT TREATMENT - PLAN VIEW - EXPANSION JOINT
55.220.1 WALL PENETRATION - NON-HYDROSTATIC
55.220.2 WALL PENETRATION - NON-HYDROSTATIC - INSULATED
55.221.1 WALL PENETRATION - NON-HYDROSTATIC - CORE DRILLED
55.221.2 WALL PENETRATION - NON-HYDROSTATIC - CORE DRILLED WITH INSULATION
55.222.1 Wall Penetration - Non-Hydrostatic - Core Drilled with Link Seal
55.222.2 WALL PENETRATION - NON-HYDROSTATIC - CORE DRILLED WITH LINK SEAL WITH INSULATION
55.230.1 WALL ASSEMBLY - NON-HYDROSTATIC - TOP OF WALL TERMINATION (OPTION 1)
55.230.2 WALL ASSEMBLY - NON-HYDROSTATIC - TOP OF WALL TERMINATION (OPTION 2)
55.230.3 WALL ASSEMBLY - NON-HYDROSTATIC - TOP OF WALL TERMINATION (OPTION 3)
55.230.4 WALL ASSEMBLY - NON-HYDROSTATIC - TOP OF WALL TERMINATION (OPTION 4)
55.240.1.1 WALL TO DECK TRANSITION - NON-HYDROSTATIC - WALL PRIMETAK STOPPED AT CONSTRUCTION JOINT
55.240.2.1 WALL TO DECK TRANSITION - NON-HYDROSTATIC - WALL PRIMETAK EXTENDED TO TOP OF DECK SLAB
55.252.6. WALL CRACK AND JOINT TREATMENT - PLAN VIEW - EXPANSION JOINT - CORNER
55.262.2 CORNER - INSIDE - FULLY ADHERED FIELD FORMED
55.262.3 FIELD FORMED SELF ADHERED OUTSIDE CORNER - NON-HYDROSTATIC
55.263.1 CORNER - OUTSIDE - FULLY ADHERED FIELD FORMED
55.381.4 Corner - TOPSIDE - INSIDE FULLY ADHERED FIELD FORMED
55.400.1 DECK ASSEMBLY - NON-HYDROSTATIC - SPLIT SLAB
55.400.2.1 DECK ASSEMBLY - NON-HYDROSTATIC - SPLIT SLAB WITH INSULATION (OPTION 1)
55.400.2.2 DECK ASSEMBLY - NON-HYDROSTATIC - SPLIT SLAB WITH INSULATION (OPTION 2)
55.400.7 COVERED DECK ASSEMBLY - NON-HYDROSTATIC
55.420.1 DECK PENETRATION - NON-HYDROSTATIC - SPLIT SLAB
55.420.2.1 DECK PENETRATION - NON-HYDROSTATIC - SPLIT SLAB WITH INSULATION (OPTION 1)
55.420.2.2 DECK PENETRATION - NON-HYDROSTATIC - SPLIT SLAB WITH INSULATION (OPTION 2)
55.425.1 DECK PENETRATION - NON-HYDROSTATIC - SPLIT SLAB WITH 2-STAGE DRAIN
55.430.1 DECK ASSEMBLY - NON-HYDROSTATIC - VERTICAL TERMINATION WITH SPLIT SLAB
55.430.1.1 DECK ASSEMBLY - NON-HYDROSTATIC - ISOMETRIC - VERTICAL TERMINATION
55.450.1 DECK CRACK AND JOINT TREATMENT - NON-HYDROSTATIC - EXPANSION JOINT WITH SPLIT SLAB
55.450.7 DECK CRACK AND JOINT TREATMENT - NON-HYDROSTATIC - EXPANSION JOINT WITH SOIL FILL
55.471.1 DECK ASSEMBLY - NON-HYDROSTATIC - TERMINATION WITH PLANTER CAPSTONE
55.472.1 DECK ASSEMBLY - NON-HYDROSTATIC - TERMINATION WITH REINFORCED PLANTER CAPSTONE (OPTION 1)
55.472.2 DECK ASSEMBLY - NON-HYDROSTATIC - TERMINATION WITH REINFORCED PLANTER CAPSTONE (OPTION 2)
55.480.1 PRIMETAK REPAIR - NON-HYDROSTATIC - SURFACE DAMAGE
55.800.1 PRIMETAK ASSEMBLY - ISOMETRIC - POST-APPLIED WALL WITH STEPPED FOOTING