Geo-Seal® EFC

Geo-Seal® EFC is a complete coating system specifically developed to mitigate vapor intrusion into existing structures. Typically composed of 6 mil primer (Geo-Seal® EFC PRIMER) and 20 mil coating (Geo-Seal® EFC), the system is applied to existing building concrete floors. Due to our specific formulation, it provides an extremely high-level chemical resistance not found in most common epoxy resin-based coatings.

Reasons for using an epoxy floor coating to mitigate vapor intrusion include:

  • Remove existing vapor intrusion pathways while also providing vapor intrusion protection
  • Site concentrations are low, but additional vapor intrusion protection is desired
  • Augment and provide redundancy to an active sub-slab vapor collection system
  • Retire the operation of an active sub-slab vapor collection system while still maintaining vapor intrusion protection.
  • Eliminates the costly removal of the existing concrete slab.
  • A new building requiring a VIMS is being built and sections requiring the VIMS were built before the system could be installed, for example elevator pits.

 

Reasons for selecting Geo-Seal EFC:

  • Specifically formulated to mitigate chlorinated solvent and petroleum hydrocarbon vapors.
  • The system contains no VOC’s
  • It is designed to be a finished system designed for foot traffic, or to additional flooring options such as carpet, vinyl flooring, etc. can be installed over the system.
  • Geo-Seal EFC provides a cost-effective alternative to other coatings designed to mitigate vapor intrusion.

 

Geo-Seal® EFC

Geo-Seal® EFC is a complete coating system specifically developed to mitigate vapor intrusion into existing structures. Typically composed of 6 mil primer (Geo-Seal® EFC PRIMER) and 20 mil coating (Geo-Seal® EFC), the system is applied to existing building concrete floors. Due to our specific formulation, it provides an extremely high-level chemical resistance not found in most common epoxy resin-based coatings.

Specification Geo-Seal EFC
PDS Geo-Seal EFC
PDS Geo-Seal EFC Clear Coat
PDS Geo-Seal EFC Gel
PDS Geo-Seal EFC Primer
SDS Geo-Seal EFC - Part A
SDS Geo-Seal EFC - Part B
SDS Geo-Seal EFC Clear Coat - Part A
SDS Geo-Seal EFC Clear Coat - Part B
SDS Geo-Seal EFC Gel - Part A
SDS Geo-Seal EFC Gel - Part B
SDS Geo-Seal EFC Primer - Part A
SDS Geo-Seal EFC Primer - Part B
60.001.0 Geo-Seal EFC - Standard Drawings
60.002.0 Geo-Seal EFC - Broadcast Application
60.003.0 Geo-Seal EFC - Area Drain Detail
60.004.0 Geo-Seal EFC - Pre-Fabricated Trench Drain
60.005.1 Geo-Seal EFC - Pipe Penetration Option 1
60.005.2 Geo-Seal EFC - Pipe Penetration Option 2
60.006.0 Geo-Seal EFC - Standard Trowel Cove Base
60.007.0 Geo-Seal EFC - Termination at Cove Base
60.008.0 Geo-Seal EFC - Horizontal to Vertical Standard Cove Base Termination
60.009.0 Geo-Seal EFC - Horizontal to Vertical Standard Cove Base Termination at Prefabricated Wall System
60.010.1 Geo-Seal EFC - Minor Concrete Repair
60.010.2 Geo-Seal EFC - Major Concrete Repair
60.011.0 Geo-Seal EFC - Crack Without Movement Repair
60.012.0 Geo-Seal EFC - Expansion Joint