E.Protect Wall

Ideal for below-grade building foundations requiring positive side, below-grade waterproofing protection, but where site conditions or budget considerations might not require an additional layer of bentonite protection. E.Protect Wall can be used in conjunction with other E.Series systems and is designed to handle a wide variety of positive side wall conditions while providing enhanced protection against common backfill materials.

Appropriate for all different types of over-excavated wall construction, two-sided formed walls, single-sided shotcrete, precast concrete, insulated concrete forms (ICF) and concrete masonry units (CMU). E.Protect Wall has several benefits:

  • Redundant waterproofing protection.
  • Provides the highest level of chemical resistance to a wide range of contaminants found in soil and groundwater.
  • Seamless.
  • Complete mechanical bond with vertical foundation walls.
  • Installs quickly with less weather sensitivity than peel and stick systems.
  • Designed for over-excavated walls of any depth.
Wall Protection System
Download System Overview for benefits, limitations & warranty details
Thickness: 95 mils
1st Layer: e.spray
2nd Layer: e.shield 115
3rd Layer: e.drain 6000

Ideal for below-grade building foundations requiring underslab waterproofing protection, but where site conditions or budget considerations might not require an additional layer of bentonite protection. E.Protect Wall can be used in conjunction with other E.Series systems and is designed to handle a wide variety of positive side wall conditions, while providing enhanced protection against common backfill materials.

It is compatible with all different types of over excavated wall construction, two-sided formed, one-sided shotcrete, precast concrete, insulated concrete forms (ICF), and concrete masonry units (CMU).

Data Sheets, Specs & Drawings
E.Series
County of Los Angeles Approval
E.Series
NSF Approval 2015
E.Series
SPECIFICATION 2018 E.Protect Below Grade
SPECIFICATION 2018 E.Protect Walls
E.Series
PDS e.adhesive
E.Series
PDS e.catalyst
E.Series
PDS e.drain 6000
E.Series
PDS e.hanger
E.Series
PDS e.poly
E.Series
PDS e.roll
E.Series
PDS e.shield 115
E.Series
PDS e.spray
Epro
PDS e.stop b
Epro
PDS e.stop hpl
E.Series
PDS e.term hd
E.Series
SDS Calcium Chloride
E.Series
SDS e.adhesive
E.Series
SDS e.catalyst
E.Series
SDS e.drain 6000
E.Series
SDS e.drain 6200
E.Series
SDS e.poly
E.Series
SDS e.roll
E.Series
SDS e.shield 110
E.Series
SDS e.shield 115
E.Series
SDS e.spray
E.Series
SDS e.stop b
Epro
SDS e.stop hpl
E.Series
SDS e.tape 106
E.Series
SDS e.term hd
E.Series
SDS e.term strip
E.Series
SDS e.trowel
E.Series
EPRO Brochure
System Overview E.Protect Wall
E.Series
2.143.1 Underslab Assembly Transition to Overexcavated Wall
2.200.1 Wall Assembly
2.201.1 Wall Bottom Positive Side
2.201.2 Wall Bottom w/Site Drain Positive Side
2.210.3 Wall E.Shield 115 Overlap
2.211.1 Concrete Wall Seismic Expansion Joint
2.212.1 Concrete Wall Control Joint
2.220.1 Wall Pipe Penetration
2.230.1 Wall Termination @ Grade
E.Series
2.240.1 Wall Assembly Transition to Deck Assembly
E.Series
2.240.2 Wall Assembly Transition to Deck Assembly w/Concrete Topping
E.Series
2.240.3 Wall Assembly Transition to Deck Assembly w/Asphalt Topping
E.Series
2.240.4 Wall Assembly Transition to Deck Assembly w/Pedestal Pavers
2.247.1 Wall Assembly Termination Transition to Self Adhered Membrane
2.248.1 Wall Transition to Shoring (Plan View)
2.260.1 Wall Inside-Outside Corner Detail
2.261.1 Wall to Footing Cold Joint Detail
E.Series
2.342.1 Shoring Assembly Transition to Deck Assembly w/Asphalt Topping
E.Series
3.144.1.02 E.Protect Underslab Assembly Transition To E.Protect+ Offset Wall Assembly
50.144.1.1.02 Underslab Assembly - Offset Slab Transition - E.Protect Wall Assembly (Option 1)
50.144.1.2.02 Underslab Assembly - Offset Slab Transition - E.Protect Wall Assembly (Option 2)
51.144.1.1.02 Underslab Assembly - Offset Slab Transition - E.Protect Wall Assembly (Option 1)
51.144.1.2.02 Underslab Assembly - Offset Slab Transition - E.Protect Wall Assembly (Option 2)